Microcontrollers

Shopping Cart

	Your Cart is Empty
	View Cart

Microcontrollers

Which devices are supported by the USB programmers?

Kit programmers # CPS128, CPS149 & CPS150 and Assembled Programmers CPA128 & CPA182, CPA149 & CPA150 all uses the same software. The software currently supports the following devices. Please note the CPS128 & CPA128 & CPA182 are Flash programmers and supports only those PICs with the 'F' in the name.

USB PIC Programmer (Assembled) (Zif socket included)

This programmer connects to a USB port. On board 'B' USB connector. Free software. A wide-slot 40 pin ZIF socket is included with this assembled version. Power supply: at least 16VDC (18VDC preferred) center positive required (power supply jack 5.5mm OD 2.5mm ID) at least 200mA. See this page for which devices can be programmed. (CPA150)

Quantity	Price
1 – 9	$77.52
10 – 99	$72.00
100 +	$69.60

Skill Level of Item:		(Assembled and Tested)
Product #		CPA150
Quantity Available:		12

All-Flash USB PIC Programmer (assembled) (Zif socket included)

This programmer connects to a USB port. Free software. Please note this programmer does NOT program non-Flash chips! Please make sure you know which PIC chips are Flash (the ones with the 'F'!) and which are not. A 40 pin wide slot zif socket is included with this assembled version. (CPA128)

Quantity	Price
1 – 9	$77.52
10 – 99	$72.00
100 +	$69.60

Skill Level of Item:		(Assembled and Tested)
Product #		CPA128
Quantity Available:		6

USB/Serial Port PIC Programm kit (ver E) (no zif socket)

This programmer (version E) connect to either a USB or serial port. Free software. Dozens of PIC's supported including 12c508, 16f84, 16F628 etc. For maximum programming flexibility a wide-slot 40 pin ZIF socket (not included) is recommended. Power supply: at least 16VDC (18VDC preferred) center positive required (power supply jack 5.5mm OD 2.5mm ID) at least 200mA. (CPS149)

Quantity	Price
1 – 9	$56.20
10 – 99	$52.20
100 +	$50.46

Skill Level of Item:		(Kit - Basic Soldering Required)
Product #		CPS149
Quantity Available:		8

USB ICSP Flash PIC Programmer (Assembled

This is an "In Circuit Serial Programmer" for flash PICs using the USB port of your PC. No Power supply required. There are 4 nylon 10mm standoffs to protect the underside. USB 'B' female connector. The board is only 48 x 30mm. (CPA182)

Quantity	Price
1 – 9	$56.20
10 – 99	$52.20
100 +	$50.46

Skill Level of Item:		(Assembled and Tested)
Product #		CPA182
Quantity Available:		12

PIC PROGRAMMER BOARD (Kit)

This board can program a wide range of Microchip® PIC™ microcontrollers Features onboard configurable 40 pin. ZIF socket Microcontroller selection using patch jumper easy to use programming PICprog2006™ software included SUBD connector set included minimum system requirements: IBM Compatible PC, Pentium or better Windows™ NT/2000/XP CDROM drive free serial RS232 port required currently supported controllers: PIC10F200 PIC12C508A,PIC12CE518 PIC12F629,PIC12F675 PIC16F54 PIC16F84A PIC16F870,PIC16F871,PIC16F872,PIC16F873,PIC16F874 PIC16F876,PIC16F877 PIC16F627,PIC16F627A,PIC16F628,PIC16F628A PIC16F648A PIC16F630,PIC16F676 PIC18F2550,... (K8076)

Quantity	Price
1 – 9	$43.75
10 – 99	$40.64
100 +	$39.28

Skill Level of Item:		(Kit - Basic Soldering Required)
Product #		K8076
Quantity Available:		4

PIC™ PROGRAMMER BOARD (Assembled)

This board can program a wide range of Microchip® PIC™ microcontrollers Features regularly updated list of microcontrollers through our web site onboard configurable 40 pin. ZIF socket easy to use programming PICprog2006™ software included on board "In Circuit Serial Programming" connector Currently supported controllers (check web site for updates):

PIC10F200

PIC12C508A

PIC12CE518

PIC16F54, PIC16F84A, PIC16F27, PIC16F627A, PIC16F628, PIC16F628A, PIC16F 30, PIC16F648A, PIC16F676, PIC16F785, PIC16F870, PIC16F871, PIC16F872, PIC16F873, PIC16F873A, PIC16F874, PIC16F874A, PIC16F876, PIC16F876A, PIC16F877, PIC16F877A

PIC18F1220, PIC18F1320, PIC18F2220, PIC18F2320, PIC18F4220, PIC18F4320, PIC18F2221, PIC18F2321, PIC18F2410, PIC18F2420, PIC18F2455, PIC18F2480, PIC18F2510, PIC18F2515, PIC18F2520, PIC18F2525, PIC18F2550, PIC18F2580, PIC18F2585, PIC18F2610, PIC18F2620, PIC18F2680, PIC18F4221, PIC18F4321, PIC18F4410, PIC18F4420, PIC18F4455, PIC18F4480, PIC18F4510, PIC18F4515, PIC18F4520, PIC18F4525, PIC18F4550, PIC18F4580, PIC18F4585, PIC18F4610, PIC18F4620, PIC18F4680
(VM134)

Quantity	Price
1 – 9	$70.20
10 – 99	$65.21
100 +	$63.03

Skill Level of Item:		(Assembled and Tested)
Product #		VM134
Quantity Available:		4

PIC PROGRAMMER & EXPERIMENT BOARD

Features
suitable for programming Microchip® FLASH PIC™ microcontrollers
supports 4 different 300 mil. PICs: 8p, 14p, 18p and 28p
test buttons and LED indicators to carry out educational experiments, such as the enclosed programming examples
easy connection to a PC through the serial port
enclosed is a Flash Microcontroller (PIC16F627) that can be reprogrammed up to 1000 times for experimenting at will
software to compile and program your source code is included
minimum system requirements:
IBM Compatible PC, Pentium or better
Windows™ 95/98/ME/NT/2000/XP
CDROM
free serial RS232 port
cable not included: e.g. CW014
also available in mounted version: VM111
(k8048)

Quantity	Price
1 – 9	$32.70
10 – 99	$30.38
100 +	$29.36

Skill Level of Item:		(Kit - Basic Soldering Required)
Product #		K8048
Quantity Available:		5

PIC® PROGRAMMER AND EXPERIMENT BOARD

Suitable for programming Microchip® FLASH PIC(tm) microcontrollers.

Features

supports 4 different 300 mil. PICs: 8p, 14p, 18p and 28p
test buttons and LED indicators to carry out educational experiments, like with the enclosed programming examples
easily connectable to a PC through the serial port
enclosed is a Flash Microcontroller (PIC16F627) that can be reprogrammed up to 1000 times for experimenting at will
software to compile and program your source code is included
(VM111)

Quantity	Price
1 – 9	$63.95
10 – 99	$59.40
100 +	$57.42

Skill Level of Item:		(Assembled and Tested)
Product #		VM111
Quantity Available:		3

PIC Trainer

This kit teaches you how to use a microcontroller (uC) for measuring temperature (in either degrees F or deg C), humidity, as a counter, as a timer and for analog to digital conversion. The code to support all these functions is contained within the one programmed uC. The kit uses three plug-in units (supplied) to a motherboard which has an LCD on-board. (CPS75)

Quantity	Price
1 – 9	$52.33
10 – 99	$48.60
100 +	$46.98

Skill Level of Item:		(Kit - Basic Soldering Required)
Product #		CPS75
Quantity Available:		3

Dual PIC Microcontoller Dice 16C54

The popular small microcontroller PIC16C54 is used to 'roll two dice' by generating two random numbers that fall between 1 and 6. All software code is provided in the documentation with complete comments so you can learn how to program these devices yourself. (the Program in the PIC16C54 is not changeable). PCB size: 1.4"x2.6". 9V battery operated.(CPS71)

Quantity	Price
1 – 9	$13.68
10 – 99	$12.96
100 +	$11.88

Skill Level of Item:		(Kit - Basic Soldering Required)
Product #		CPS71
Quantity Available:		4

Atmel 89xxxx Programmer kit

To program:
89C1051, 89C2051 and 89C4051
89C51, 89LV51, 89C52, 89LV52, 89C55, 89LV55, 89S8252, 89LS8252
89S53, 89LS53. 87F51, 87F52 (otp) Uses serial port so can use any terminal emulation software on any computer. Windows 95 & 98 use Hyperterminal which comes with W95/W98.
2 x ZIF sockets not included (20 pin and 40 pin) 16VDC input (at least 150mA)
PCB size: 118mm x 70mm (4.7" x 2.8")
Full documentation acrobat 4 format
Two DOS utilities are available for downloading to examine and reorder fragmented hex files which some compilers produce. (Fragmented hex files can choke any serial programming software not expecting it.) hexmap.exe and reorder.exe
You may use the following no frills terminal program that is easier than Hyperterminal. DOS based but will run under W9x. How to use term.exe
(CPS123)

Quantity	Price
1 – 9	$29.07
10 – 99	$27.00
100 +	$26.10

Skill Level of Item:		(Kit - Basic Soldering Required)
Product #		CPS123
Quantity Available:		3

K1 mC Number System Decoder 68HC705K

Binary/hexadecimal/decimal/2's complement converter using a K1 uC. Eight LEDs are in a row. Step turns them on in turn by counting up using binary arithmetic. The 3-digit display shows the decimal equivalent (between 0 & 255) of the binary pattern. Press mode and the equivalent hexadecimal value (between 0 & FF) of the binary pattern is displayed. Mode and step pressed together will count backwards. If step is kept depressed the LEDs will rapidly count through the complete binary cycle in about 9 seconds.

But that is only half the capability of the kit. Pressing mode again will show the 2's complement binary pattern of the previously displayed binary number. The equivalent hex and decimal values of the 2's comp number are also shown on the 3-digit display. Double-sided small PCB size: 49mm x 79mm, 1.95" x 3.1". Supplied with box. 9V battery required. Display turns off after 1 minute with no keypress. Complete annotated program code supplied on floppy disk.(CPS42)

Quantity	Price
1 – 9	$19.90
10 – 99	$17.10
100 +	$11.80

Skill Level of Item:		(Kit - Basic Soldering Required)
Product #		CPS42
Quantity Available:		2

EEPROM Programmer

Serial eeproms are finding more and more use in electronic devices these days. These small 8 pin devices offer non-volatile data storage and require
minimal I/O lines to connect to them. This makes them ideal in many microcontroller based applications. The programmer connects to the PC parallel port and is controlled by driver software running on the PC. The software is DOS based but will run under Windows 3.1, Windows 9x and Windows NT4 (service pack 5). The programmer requires a 9-to-12V DC supply at 50mA. A 12VDC/150mA plug pack will be fine. PCB size: 2 1/2"x2"(CPS151)

Quantity	Price
1 – 9	$10.26
10 – 99	$9.72
100 +	$8.91

Skill Level of Item:		(Kit - Basic Soldering Required)
Product #		CPS151
Quantity Available:		4

MINI PIC-PLC APPLICATION MODULE

This application module may seem small but is big in performance - all depends on your programming skills. Now you can create your own custom application without the hassle of making the hardware. All the buffered inputs and outputs are ready-made for you. The module features on-board LED, a relay output and a buzzer. Make your own automation, controller, car application… All you need is one of our programmers like vm134 or K8076 Features: 9 free programmable I/Os (4 in-, 5 outputs) PIC16F630 microcontroller from Microchip® on-board LED indication for power supply and relay output 1 free programmable LED indication on-board mini buzzer for audible signals on-board ICSP™ connector for programming PIC™ programmer supports PIC16F630 (VM142)

Quantity	Price
1 – 9	$47.97
10 – 99	$44.55
100 +	$43.07

Skill Level of Item:		(Assembled and Tested)
Product #		VM142
Quantity Available:		2